Difference between revisions of "Rolpoort bediening"

From Hackerspace ACKspace
Jump to: navigation, search
Line 1: Line 1:
 
{{Project
 
{{Project
−
|Members=Da Syntax
+
|State=Completed
 +
|Members=Da Syntax, Prodigity
 
|Description=Controll the gate using your cellphone
 
|Description=Controll the gate using your cellphone
 
}}
 
}}
Line 61: Line 62:
 
----
 
----
 
https://ackspace.nl/wiki/File:Phone_relais_V2.tar
 
https://ackspace.nl/wiki/File:Phone_relais_V2.tar
 +
----
 +
#include <SoftwareSerial.h>
 +
#include <EEPROM.h>
 +
 +
SoftwareSerial mobiel(9, 10); // RX, TX
 +
unsigned long CID_Current;
 +
unsigned long CID_Sender;
 +
unsigned long CID_Add;
 +
unsigned long CID_Joshua = 642828732;
 +
unsigned long CID_Michel = 655986620;
 +
byte myChar;
 +
int mobMSGi = 0;
 +
char mobMSG[128];
 +
char incomingCall[] = "*ECAV: 1,6,1,,,";
 +
char readSMS[] = "+CMGL:";
 +
 +
void checknumber(long CID_call);
 +
void addnumber(long CID_Call, long CID_sms);
 +
boolean compare(char stringone[], char stringtwo[]);
 +
boolean timerflag = false;
 +
 +
boolean addNumber = false;
 +
 +
void setup()
 +
{
 +
  pinMode(7, OUTPUT);
 +
 
 +
  Serial.begin(9600);
 +
 
 +
  mobiel.begin(9600);
 +
  delay(500);
 +
 
 +
  mobiel.println("AT*ECAM=1");
 +
  delay(500);
 +
  mobiel.println("AT+CPMS=\"ME\"");
 +
  delay(500);
 +
  mobiel.println("AT+CMGF=1");
 +
  Serial.println("Setup done");
 +
}
 +
 +
void loop()
 +
{
 +
  if (mobiel.available()) {
 +
    mobMSG[mobMSGi] = mobiel.read();
 +
    Serial.write(mobMSG[mobMSGi]);
 +
    if ( mobMSG[mobMSGi] == '\n' ) {
 +
      if(addNumber == true){
 +
       
 +
        CID_Add = 0;
 +
        for(int i = 1; i < 15; i++){
 +
          if(mobMSG[i] == '\r'){
 +
            i = i+15;
 +
          }
 +
          else{
 +
            CID_Add *= 10;
 +
            CID_Add += mobMSG[i] - 48;
 +
            //Serial.print(mobMSG[i], DEC);
 +
          }
 +
        }
 +
        Serial.print("Sender:");
 +
        Serial.print(CID_Sender);
 +
        Serial.print(" Add:");
 +
        Serial.println(CID_Add);
 +
        addnumber(CID_Sender, CID_Add);
 +
        addNumber = false;
 +
      }
 +
      else if ( compare(mobMSG, incomingCall, 15) == true ) {
 +
        Serial.println("JACKPOT!!!!!!!!!!!");
 +
        CID_Current = 0;
 +
        for (int i = sizeof(incomingCall)+2; mobMSG[i+1] != '"'; i++) {
 +
          CID_Current *= 10;
 +
          CID_Current += mobMSG[i+1] - 48;
 +
        }
 +
        Serial.print("Telefoonnummer: ");
 +
        Serial.print(CID_Current);
 +
        Serial.println("");
 +
        checknumber(CID_Current);
 +
 +
      }
 +
      else if(compare(mobMSG, readSMS, 6) == true){
 +
        for(int i = 0; i < 60; i++) {
 +
          if(mobMSG[i] == '"'){
 +
            if(mobMSG[i+1] == ','){
 +
              if(mobMSG[i+2] == '"'){
 +
                CID_Sender = 0;
 +
                for(int c = i+6; c < (i+3+15); c++){
 +
                  if(mobMSG[c] == '"'){
 +
                    c = c+15;
 +
                  }
 +
                  else{
 +
                    CID_Sender *= 10;
 +
                    CID_Sender += mobMSG[c] - 48;
 +
                  }
 +
                }
 +
                addNumber = true;
 +
               
 +
                i=i+60;
 +
              }
 +
            }
 +
          }
 +
        }
 +
        for(int i = 0; i < 60; i++) {
 +
          if(mobMSG[i] == 'L'){
 +
            if(mobMSG[i+1] == ':'){
 +
              if(mobMSG[i+2] == ' '){
 +
                delay(500);
 +
                mobiel.print("AT+CMGD=");
 +
                delay(500);
 +
                mobiel.println(mobMSG[i+3]);
 +
                Serial.print("delete for: ");
 +
                Serial.println(mobMSG[i+3]);           
 +
                i=i+60;
 +
              }
 +
            }
 +
          }
 +
        }
 +
      }
 +
     
 +
      mobMSGi = 0;
 +
    }
 +
    mobMSGi++;
 +
  }
 +
 
 +
  if (Serial.available())
 +
  mobiel.write(Serial.read());
 +
  if (millis()%60000 < 5000 && timerflag == false) {
 +
    mobiel.println("AT+CMGL=\"ALL\"");
 +
    timerflag = true;
 +
  }
 +
  else if (millis()%60000 > 5000) {
 +
    timerflag = false;
 +
  }
 +
}
 +
 +
boolean compare(char stringone[], char stringtwo[], int length) {
 +
  boolean check = true;
 +
  for(int i = 0; i < length; i++) {
 +
  if (stringone[i+1] != stringtwo[i]) {
 +
  check = false;
 +
  }
 +
  }
 +
  return check;
 +
}
 +
 +
void checknumber(long CID_call) {
 +
  // Check if current CID is in our EEPROM, if so open door.
 +
 +
  byte value;
 +
  unsigned long CID_mem = 0;
 +
 +
  for (int EEPROMloc = 0; EEPROMloc < 1024; EEPROMloc+=4) {
 +
    for (int i = 0; i < 4; i++) {
 +
      value = EEPROM.read(EEPROMloc+i);
 +
      CID_mem = CID_mem << 8;
 +
      CID_mem += value;
 +
    }
 +
    if (CID_mem == CID_call) {
 +
      opendoor();
 +
      Serial.println("Opening door");
 +
      EEPROMloc = 1024;
 +
    }
 +
  }
 +
}
 +
 +
void addnumber(long CID_Call, long CID_sms) {
 +
  // Add number to EEPROM if sender is admin
 +
 +
  byte value;
 +
  byte temp;
 +
  unsigned long CID_mem = 0;
 +
 +
  long CID_Josh = 642828732;
 +
  long CID_Michel = 655986620;
 +
 
 +
  if (CID_Call == CID_Josh || CID_Call == CID_Michel) {
 +
    Serial.println("Admin recognized");
 +
    for (int EEPROMloc = 0; EEPROMloc <  1024; EEPROMloc+=4) {
 +
      for (int i = 0; i < 4; i++) {
 +
        value = EEPROM.read(EEPROMloc+i);
 +
        CID_mem = CID_mem << 8;
 +
        CID_mem += (unsigned long) value;
 +
        Serial.println(value);
 +
      }
 +
      Serial.println(CID_mem);
 +
      if (CID_mem == 0) {
 +
        temp = (CID_sms << 0) >> 24;
 +
        EEPROM.write(EEPROMloc, temp);
 +
        temp = (CID_sms << 8)  >> 24;
 +
        EEPROM.write(EEPROMloc + 1, temp);
 +
        temp = (CID_sms << 16) >> 24;
 +
        EEPROM.write(EEPROMloc + 2, temp);
 +
        temp = (CID_sms << 24) >> 24;
 +
        EEPROM.write(EEPROMloc + 3, temp);
 +
        Serial.print("Address: ");
 +
        Serial.println(EEPROMloc);
 +
        Serial.print("Number: ");
 +
        Serial.println(CID_sms);
 +
        EEPROMloc = 1024;
 +
      }
 +
    }
 +
  }
 +
}
 +
 +
void opendoor() {
 +
  digitalWrite(7, HIGH);
 +
  delay(1000);
 +
  digitalWrite(7, LOW);
 +
}

Revision as of 21:10, 14 October 2012

Project: Rolpoort bediening
Featured:
State Completed
Members Da Syntax, Prodigity
GitHub No GitHub project defined. Add your project here.
Description Controll the gate using your cellphone
Picture
No project picture! Fill in form Picture or Upload a jpeg here

Setup done AT*ECAM=1

OK

RING

  • ECAV: 1,6,1,,,"31642828732",145

RING

  • ECAV: 1,0,1,08,222


Code om PDU packed bitsequence om te zetten naar "Human readable" code

Hiero

https://ackspace.nl/wiki/File:Sketchbook.tar



  1. include <SoftwareSerial.h>

SoftwareSerial mobiel(9, 10); // RX, TX

unsigned long CID_Current;
unsigned long CID_Joshua = 642828732;
unsigned long CID_Michel = 655986620;

byte myChar;
int mobMSGi = 0;
char mobMSG[128];
char bingo[] = "*ECAV: 1,6,1,,,";

boolean compare(char stringone[], char stringtwo[]);

void setup()
{
pinMode(7, OUTPUT);

Serial.begin(9600);

mobiel.begin(9600);
delay(500);

mobiel.println("AT*ECAM=1");
Serial.println("Setup done");
}

void loop()
{
if (mobiel.available()) {
mobMSG[mobMSGi] = mobiel.read();
Serial.write(mobMSG[mobMSGi]);
if ( mobMSG[mobMSGi] == '\n' ) {
if ( compare(mobMSG, bingo) == true ) {
Serial.println("JACKPOT!!!!!!!!!!!");
CID_Current = 0;
for (int i = sizeof(bingo)+2; mobMSG[i+1] != '"'; i++) {
CID_Current *= 10;
CID_Current += mobMSG[i+1] - 48;
}
Serial.print("Telefoonnummer: ");
Serial.print(CID_Current);
Serial.println("");
switch (CID_Current) {
case 642828732:
Serial.println("Joshua belt");
break;
case 655986620:
Serial.println("Michel belt");
break;
default:
Serial.println("Onbekend belt");
}
}
mobMSGi = 0;
}
mobMSGi++;
}

if (Serial.available())
mobiel.write(Serial.read());
}

boolean compare(char stringone[], char stringtwo[]) {
boolean check = true;

for(int i = 0; i < 15; i++) {
if (stringone[i+1] != stringtwo[i]) {
check = false;
}
}

return check;
}


AT
OK
AT+CMGF=1
OK
AT+CMGL="ALL"
+CMGL: 1,"REC READ","+85291234567",,"06/11/11,00:30:29+32"
Hello, welcome to our SMS tutorial.
+CMGL: 2,"REC READ","+85291234567",,"06/11/11,00:32:20+32"
A simple demo of SMS text messaging.

OK

https://ackspace.nl/wiki/File:Phone_relais_V2.tar

  1. include <SoftwareSerial.h>
  2. include <EEPROM.h>

SoftwareSerial mobiel(9, 10); // RX, TX unsigned long CID_Current; unsigned long CID_Sender; unsigned long CID_Add; unsigned long CID_Joshua = 642828732; unsigned long CID_Michel = 655986620; byte myChar; int mobMSGi = 0; char mobMSG[128]; char incomingCall[] = "*ECAV: 1,6,1,,,"; char readSMS[] = "+CMGL:";

void checknumber(long CID_call); void addnumber(long CID_Call, long CID_sms); boolean compare(char stringone[], char stringtwo[]); boolean timerflag = false;

boolean addNumber = false;

void setup() { 

 pinMode(7, OUTPUT);
 
 Serial.begin(9600);
 
 mobiel.begin(9600);
 delay(500);
 
 mobiel.println("AT*ECAM=1");
 delay(500);
 mobiel.println("AT+CPMS=\"ME\"");
 delay(500);
 mobiel.println("AT+CMGF=1");
 Serial.println("Setup done");

}

void loop() { 

 if (mobiel.available()) {
   mobMSG[mobMSGi] = mobiel.read();
   Serial.write(mobMSG[mobMSGi]);
   if ( mobMSG[mobMSGi] == '\n' ) {
     if(addNumber == true){
       
       CID_Add = 0;
       for(int i = 1; i < 15; i++){
         if(mobMSG[i] == '\r'){
           i = i+15;
         }
         else{
           CID_Add *= 10;
           CID_Add += mobMSG[i] - 48;
           //Serial.print(mobMSG[i], DEC);
         }
       }
       Serial.print("Sender:");
       Serial.print(CID_Sender);
       Serial.print(" Add:");
       Serial.println(CID_Add);
       addnumber(CID_Sender, CID_Add);
       addNumber = false;
     }
     else if ( compare(mobMSG, incomingCall, 15) == true ) {
       Serial.println("JACKPOT!!!!!!!!!!!");
       CID_Current = 0;
       for (int i = sizeof(incomingCall)+2; mobMSG[i+1] != '"'; i++) {
         CID_Current *= 10;
         CID_Current += mobMSG[i+1] - 48;
       }
       Serial.print("Telefoonnummer: ");
       Serial.print(CID_Current);
       Serial.println("");
       checknumber(CID_Current);

     }
     else if(compare(mobMSG, readSMS, 6) == true){
       for(int i = 0; i < 60; i++) {
         if(mobMSG[i] == '"'){
           if(mobMSG[i+1] == ','){
             if(mobMSG[i+2] == '"'){
               CID_Sender = 0;
               for(int c = i+6; c < (i+3+15); c++){
                 if(mobMSG[c] == '"'){
                   c = c+15;
                 }
                 else{
                   CID_Sender *= 10;
                   CID_Sender += mobMSG[c] - 48;
                 }
               }
               addNumber = true;
               
               i=i+60;
             }
           }
         }
       }
       for(int i = 0; i < 60; i++) {
         if(mobMSG[i] == 'L'){
           if(mobMSG[i+1] == ':'){
             if(mobMSG[i+2] == ' '){
               delay(500);
               mobiel.print("AT+CMGD=");
               delay(500);
               mobiel.println(mobMSG[i+3]);
               Serial.print("delete for: ");
               Serial.println(mobMSG[i+3]);            
               i=i+60;
             }
           }
         }
       }
     }
     
     mobMSGi = 0;
   }
   mobMSGi++;
 }
 
 if (Serial.available())
 mobiel.write(Serial.read());
 if (millis()%60000 < 5000 && timerflag == false) {
   mobiel.println("AT+CMGL=\"ALL\"");
   timerflag = true;
 }
 else if (millis()%60000 > 5000) {
   timerflag = false;
 }

}

boolean compare(char stringone[], char stringtwo[], int length) { 

 boolean check = true;
 for(int i = 0; i < length; i++) {
 if (stringone[i+1] != stringtwo[i]) {
 check = false;
 }
 }
 return check;

}

void checknumber(long CID_call) { 

 // Check if current CID is in our EEPROM, if so open door.

 byte value;
 unsigned long CID_mem = 0;

 for (int EEPROMloc = 0; EEPROMloc < 1024; EEPROMloc+=4) {
   for (int i = 0; i < 4; i++) {
     value = EEPROM.read(EEPROMloc+i);
     CID_mem = CID_mem << 8;
     CID_mem += value;
   }
   if (CID_mem == CID_call) {
     opendoor();
     Serial.println("Opening door");
     EEPROMloc = 1024;
   }
 }

}

void addnumber(long CID_Call, long CID_sms) { 

 // Add number to EEPROM if sender is admin

 byte value;
 byte temp;
 unsigned long CID_mem = 0;

 long CID_Josh = 642828732;
 long CID_Michel = 655986620;
 
 if (CID_Call == CID_Josh || CID_Call == CID_Michel) {
   Serial.println("Admin recognized");
   for (int EEPROMloc = 0; EEPROMloc <  1024; EEPROMloc+=4) {
     for (int i = 0; i < 4; i++) {
       value = EEPROM.read(EEPROMloc+i);
       CID_mem = CID_mem << 8;
       CID_mem += (unsigned long) value;
       Serial.println(value);
     }
     Serial.println(CID_mem);
     if (CID_mem == 0) {
       temp = (CID_sms << 0) >> 24;
       EEPROM.write(EEPROMloc, temp);
       temp = (CID_sms << 8)  >> 24;
       EEPROM.write(EEPROMloc + 1, temp);
       temp = (CID_sms << 16) >> 24;
       EEPROM.write(EEPROMloc + 2, temp);
       temp = (CID_sms << 24) >> 24;
       EEPROM.write(EEPROMloc + 3, temp);
       Serial.print("Address: ");
       Serial.println(EEPROMloc);
       Serial.print("Number: ");
       Serial.println(CID_sms);
       EEPROMloc = 1024;
     }
   }
 }

}

void opendoor() { 

 digitalWrite(7, HIGH);
 delay(1000);
 digitalWrite(7, LOW);

}

Retrieved from "https://ackspace.nl/w/index.php?title=Rolpoort_bediening&oldid=2796"